*The J2534 Tactrix Openport 2.0 interface and a BitSoftware Senselock USB dongle are required in order to use this software!

GM ACDelco E38 (FID: 96)

ECU is based on MCU Motorola MPC561 with external flash memory 2.0Mb.

Allows to read full flash and write calibration area through CAN-bus with checksum correction on writing.

Reading/writing time about 3-5 minutes!

GM ACDelco E39 (FID: 100)

ECU is based on MCU Motorola MPC5566 with internal flash memory 3.0Mb.

Allows to read full flash and write calibration area through CAN-bus with checksum correction on writing.

Reading/writing time about 3-5 minutes!

GM ACDelco E39A (FID: 97)

ECU is based on MCU Motorola MPC5566 with internal flash memory 3.0Mb.

Allows to read full flash and write calibration area through CAN-bus with checksum correction on writing.

Reading/writing time about 3-5 minutes!

GM ACDelco E67 (FID: 99)

ECU is based on MCU Motorola MPC565 with external flash memory 2.0Mb.

Allows to read full flash and write calibration area through CAN-bus with checksum correction on writing.

Reading/writing time about 3-5 minutes!

GM ACDelco E78 (FID: 94)

ECU is based on MCU Motorola MPC5566 with internal flash memory 3.0Mb.

Allows to read full flash and write calibration area through CAN-bus with checksum correction on writing.

Reading/writing time about 3-5 minutes!

GM ACDelco E83 (FID: 91)

ECU is based on MCU Motorola MPC5565 with internal flash memory 2.0Mb.

Allows to read full flash and write calibration area through CAN-bus with checksum correction on writing.

Reading/writing time about 3-5 minutes!

GM ACDelco E92 (FID: 98)

ECU is based on MCU NXP SPC5674 with internal flash memory 4.0Mb.

Allows to read full flash and write calibration area through CAN-bus with checksum correction on writing.

Reading/writing time about 3-5 minutes!