The cable is fitted with an OBD2 female plug allowing connection any OBD flash tool.

It features:

Female OBD2 port
Power connections by 12V and GND crocodile clips or 2.1mm DC power jack. (Power supply not included)
LED indicator to confirm when ECU is ON.
6 x 12V connectors for ECU
6 x GND connectors for ECU
3 x switched ignition connectors for ECU
Switched ECU Power (ON/OFF)
Switched CAN bus termination resistors (60Ω / 120Ω / OFF)
Switch-able ignition pins (OFF / ON / K-Line) for tools using K-Line for reset function
2 x CAN Low
2 x CAN High
1 x CAN2 Low (Ford / Volvo)
1 x CAN2 High (Ford / Volvo)
2 x K-Line
1 x L-Line
Kline with diode N4148 for reset function
Bootpins: 560Ω / 1KΩ / 4.7KΩ