Here are some PCMFlash updates:

MODULE 62

Added module 62 for “Ford / Getrag 6DCT450”, designed to work with the 6DCT450 TCUs installed Ford / Volvo / JLR vehicles. It supports reading, writing, cloning!

PowerShift TCM (6DCT450) [RD / WR]
PowerShift 6DCT450 Boot (MICRO / EEPROM) [RD / WR]

MODULE 63

Added module 63 “Renault DC4”, designed to work with the DC4 TCU installed Renault vehicles. It supports reading, writing and checksum correction.

EDC DC4 Gearbox (TC1766 / 1506KB) [RD / WR / CK]

MODULE 64

Added module 64 “Mitsubishi Fuso Canter”, designed to work with EDC7 / EDC16 / EDC17 ECU of Mitsubishi Fuso Canter diesel engines. It supports reading, writing and checksum correction. For some vehicles with an EDC7 / EDC16 control units, a direct connection to the unit connector may be required.

Fuso Canter (EDC7C4-6 / EDC16C31) [RD / WR / CK]
Fuso Canter Euro 5 CAN-bus (EDC17CP15) [RD / WR / CK]
Fuso Canter Euro 5 CAN-bus (EDC17CP52) [RD / WR / CK]

MODULE 23

Module 23 for “Subaru Denso” – Euro 6 diesel and 2018MY petrol models have been added. It supports reading, writing and checksum correction.

1.6L, 2.0L DI Denso 2018+ CAN-bus (1N83M / 1.5MB) [RD / WR / CK]
2.0L Denso Diesel Euro 6 CAN-bus (SH72543 / 2MB) [RD / WR / CK]

MODULE 25

Module 25 for “Renault / Nissan dCi” – SID309 installed in Renault Master 2.3L dCi vehicles has been added. It supports reading, writing and checksum correction.

2.3 L dCi SID 309 (TC1767 / 2MB) [ RD / WR / CK ]

MODULE 29

Module 29 for “Ford PWM” – PCM150 has been added. It supports reading, writing and checksum correction.

3.0L, 4.0L, 4.6L Duratec V6 / V8 (PCM150) [RD / WR / CK]

MODULE 34

Module 34 for “Kia / Hyundai EDC15 / EDC16” – EDC15C7 has been added. It supports reading, writing and checksum correction.

2.0L, 2.5L CRDI K-Line (EDC15C7) [RD / WR / CK]

MODULE 35

Module 35 for “Toyota / Lexus / Scion / Hino” – Hybrid control units added. It supports writing and checksum correction.

76F0038 / 39/40/50/70/85 HV Control CAN-bus [WR / CK]

MODULE 4

Module 4 for “Scania EMS S7 / S8” – EMS S8 has been added. It supports writing and checksum correction.

Scania EMS S8 250Kbps (MPC5566) [WR / CK]
Scania EMS S8 500Kbps (MPC5566) [WR / CK]

MODULE 53

Module 53 for “Infineon Tricore BSL” now reads passwords for Continental SID 208 (PSA), Bosch MED17.9.3 (Honda). Also now reads and writes the external EEPROM on Delphi CRD3.1 (Mercedes-Benz).

Delphi CRD3.1 EEPROM (32KB)

MODULE 57

Module 57 for “SIMOS 8/10/11 / PCR2.1” – SIMOS8.1 / 8.3 added. It supports reading, writing (without the need for unlocking by BSL!) and checksum correction.

2.8L V6 FSI (SIMOS8.1) [RD / WR / CK]
3.0L V6 TFSI (SIMOS8.3) [VR / WR / CK]

MODULE 58

Module 58 for “VAG DSG / CVT” – VL300 / V30 / DQ200 TP2.0 / DQ250 TP2.0 and DQ500 added. Operating in both BSL/OBD mode for the VL300 / V30 and OBD support for with DQ200, DQ250 and DQ500.

DQ200 (0AM) [WR / CK]
DQ250 Cxx (02E) [RD / WR / CK]
DQ250 Exx/Fxx (02E) [WR / CK]
VL300 / V30 (01J / 0AN) [WR / CK]
DQ500 (0BH / 0BT) [RD / WR / CK]
VL300 / V30 BSL (FLASH) [RD / WR / CK]
VL300 / V30 BSL (EEPROM) [RD / WR / CK]